Cone Calorimeter，is Suitable For Testing The Heat Release Rate Of Building Materials

I. Product Description:
This tester complies with the technical indicators and requirements stipulated in the national standard GB/ T16172-2007/1SO5660-1:2002 and is applicable
For the test of the heat release rate of building materials.
Equipment performance indicators
Power supply voltage: AC220V, AC 50Hz
Maximum operating power: ≥5Kw
The power of the conical heater is ≤5KW
Heat output capacity: 0-120KW/m ³
Exhaust flow rate: 0.012m²/s to 0.035m/s (adjustable)
Timing value resolution: 1 second
The error is less than 1s/n
Oxygen analysis: Paramagnetic oxygen analyzer
Concentration range: 0-25%
Smoke density analysis: (Optional)
Infrared analyzer: CO: 0-1%
CO2:0-10% (Optional)
Ii. Main Features
The test result data of the SZL-1 type cone calorimeter include the following:
a Ignition time
The average heat release rate of b within 180 to 300 seconds after ignition
Total heat release of C (mj/m²)
The initial mass and residual mass (Kg) of sample d
Average mass loss (kg/s) from f ignition to the end of the test
g radiation intensity (KW/M²) and exhaust volume (m/s)
h Heat release rate - Time curve i Smoke release rate (optional)
Toxic gases (carbon monoxide, carbon dioxide) (optional) Generation rate (optional)
High-voltage spark generator: Automatic positioning ignition equipment modular combination: Users can select standard configurations according to actual applications.
The external dimensions of the equipment: length × width × height (1.68×0.686×1.92) m; Equipment weight: 350Kg.

Cone Calorimeter for building materials

Heat release rate testing equipment

Rubber testing calorimeter with warranty

Cone Calorimeter，is Suitable For Testing The Heat Release Rate Of Building Materials Images