Single-sided Water Curtain Cabinet, Made of Stainless Steel

Water curtain cabinet

Purpose and working principle

Environmentally-friendly water curtain cabinet (painting table) is mainly used for painting assembly line workshops in all walks of life as environmental protection equipment for painting waste gas treatment. Its working principle is that the self-priming pump circulates and pumps water to the water curtain plate to flow down evenly, and the exhaust gas (lacquer) sprayed by the spray gun is hit by the water on the water curtain board to the water discharge below. In addition, a small part of the exhaust gas (lacquer) is discharged from the outside of the workshop by the fan above through the exhaust duct. So that there is no exhaust gas (lacquer) in the workshop, to give everyone a good working environment. The characteristic is that the remaining paint powder can be directly hit in the pool or water curtain during painting, and the odor generated during painting and a small amount of unadsorbed paint powder are filtered through the multi-layer water curtain and discharged to the outside of the paint spraying room through the exhaust fan, so as to purify the painting working environment and protect human health, and can enhance the finish of the painted workpiece

Equipment parameters:

Type Single-sided water curtain type

Internal dimensions of the device W1500XD1200XH1800mm(height including pool)

Equipment dimensions (approx.) W1500XD1400XH2250mm (height excluding fan)

Pool plates    The national standard 1.2mm cold-rolled steel plate is hydraulic welded, and the height of the pool is about: 300mm

Side panels   The national standard 1.2mm cold-rolled steel plate is hydraulicly formed, and the height of the side plate is about: 2400mm

Roof National standard 1.2mm cold-rolled steel plate hydraulic forming

Water slab board   It is made of 201# 1.0mm stainless steel plate hydraulic combination

The distance between the water curtain and the cabinet opening   Maximum size: 400mm

Bottom   1.5X50X50 iron square through welding reinforcement.

Chassis mounting  M12X100 adjustment cup, adjust the level

Filtered water tank National standard 1.5mm cold-rolled steel plate hydraulic welded 400*300MM equipped with a filter screen

Junctions The connecting plate is connected with the plate by screws

Paint mist trapping type  Spray wash

Circulating pipes Iron) Pipe diameter 63MM 2 inches

Fans 1 set of 3P 380V Lixin fan × (Kyushu)

Pump  1 set of 3P 380V 50Hz water pump

Explosion-proof fluorescent lamps  40W ×1 set (double tube)

Control electric box One set (CHINT)

Power supply  3 phase 4 wires

Our services:

1. High quality assurance.

2. Shipment of professional documents.

3. Packed according to your requirements, photos are attached before shipment.

4. Reply within 48 hours, 3 working days

5. Professional after-sales service of our engineers.

6. Warranty period is 12 months.

Our advantages:

1. Professional technical support.

2. Rich experience in loading a large number of containers in Chinese seaports.

3. Fast shipping by well-known shipping company.

4. Best service with email after shipment.

5. We are a professional testing equipment manufacturer in China, with rich experience and skills, and also with the best quality products.

6. Timely after-sales service